Sand and Finish Hardwood Floors in Bentonville, AR
Sand and finish, screen and recoat, custom stain matching, board replacement, water-damage repair. Bona Certified, dustless sanding, lifetime finish warranty available. We've refinished floors from Bentonville Square historic homes to Pinnacle Hills new builds since 2010.
Bringing tired Bentonville floors back to life
Bentonville's housing stock is a mix of post-2015 corporate-relocation new builds in Pinnacle Hills, Scotsdale, and The Preserve, and original Craftsman-era hardwood throughout the historic Bentonville Square and A Street district. What both share is real, sandable hardwood underneath whatever surface scuffs, sun-faded patches, pet damage, or 1990s yellowed finish that's currently on top.
Refinishing, also called sand and finish, takes those existing floors all the way down to bare wood, lets you choose a fresh stain (or keep the natural color), and rebuilds the finish with multiple coats of Bona Certified sealer and topcoat. The result is a floor that looks brand new without the cost of replacement, and one that, in most species, can be refinished again three to five times over the life of the home.
What we mean when we say "sand and finish" in Bentonville
"Sand and finish" and "refinishing" are the same job. The trade calls it sand and finish; homeowners usually search for refinishing. Both refer to:
- Sanding the existing hardwood down to bare wood
- Filling small gaps, replacing damaged boards if needed
- Optionally staining to a new color (or keeping natural)
- Applying multiple coats of Bona Certified sealer and topcoat
- Final buff and polish for a uniform, durable finish
How a Bentonville sand and finish project goes
Most Bentonville refinishing projects we run take 3 to 5 working days from arrival to walking back on the floor in socks. Here's the order of operations.
Free in-home estimate
We come to your Bentonville home, measure square footage, look at species, condition, and damage. You get written pricing the same day or next.
Furniture and prep
We move major furniture, mask off doorways and HVAC returns, and seal the work zone. Pets and small kids stay out of the room during sanding hours.
Dustless sanding
HEPA-contained drum and edger sanders pull dust at the source. We sand in three grits, finer each pass, until the floor is uniformly bare and smooth.
Stain (optional)
If you want a color change, we apply test boards in your home so you approve the exact stain before full application. We then stain the entire floor and let it dry overnight.
Sealer and finish
Two to four coats of Bona Certified sealer and topcoat, lightly buffed between coats. Each coat needs cure time, which is the longest part of the project.
Final walkthrough
Furniture moved back, edges trimmed, walkthrough with you. The finish is walkable in 24 hours and fully cured in 7 to 14 days, depending on the product.
What hardwood floor refinishing costs in Bentonville
Refinishing costs in Bentonville depend on square footage, species, condition, stain choice, and finish type. Below are our typical Bentonville price ranges. Every project starts with a free, in-person estimate, never a phone quote.
Bentonville refinishing price ranges
- Full sand and finish (no stain)
- to per sq ft
- Full sand and finish with custom stain
- quoted by free in-home written estimate
- Screen and recoat (buff and coat)
- quoted by free in-home written estimate
- Board replacement (per board)
- to each, species-dependent
- Water damage repair
- Quoted after in-home assessment
- Lifetime finish warranty upgrade
- Available on most projects
A typical 1,000 sq ft Bentonville home runs ,500 to ,500 for a no-stain refinish, and ,750 to ,500 for a custom-stained refinish. Most projects can be completed within a week from start to walkable finish.
When to refinish a Bentonville floor, and when to replace it
A good rule of thumb: if your floor is solid hardwood (not engineered with a thin wear layer) and the boards aren't structurally compromised, refinishing is almost always the better call, financially and aesthetically. Here's a side-by-side.
Refinish your existing floor when…
- Surface scratches, scuffs, or dull finish
- Sun-faded patches, especially near windows
- Water rings, pet stains, or discoloration
- You want a different stain color
- The floor is solid 3/4-inch hardwood
- Engineered floor with 4mm+ wear layer
- You're staying in the home long-term
Replace boards or the floor when…
- Deep cupping, crowning, or buckling
- Subfloor moisture or rot
- Engineered floor with thin wear layer (already refinished)
- Major termite or insect damage
- Pet stains that have penetrated the wood
- You're switching to wide-plank or different species
- Whole-room water damage
Honest answer: most Bentonville floors we look at can be refinished. We tell you up front when replacement is the better economic call. Read our full deep-dive on refinishing vs replacing →
Bentonville neighborhoods we refinish floors in
We've sanded and refinished floors across the full Bentonville map. Some neighborhoods we've worked in repeatedly:
Bentonville neighborhoods where we've refinished hardwood
- Downtown Bentonville and the Bentonville Square historic district
- A Street historic district
- Osage Hills
- Pinnacle Hills
- Scotsdale
- Willowbend / The Preserve
- Bentonville West / Centerton corridor
- Walmart Home Office corporate-relocation neighborhoods
We also refinish in Centerton, Cave Springs, and Pea Ridge as part of our Bentonville-area service zone. See our full Bentonville services page →
Bentonville sand and finish questions we hear most
How much does it cost to refinish hardwood floors in Bentonville?
Hardwood floor refinishing in Bentonville typically runs quoted by free in-home written estimate for a full sand and finish, depending on species, condition, and whether custom stain matching is needed. Screen and recoat runs quoted by free in-home written estimate. Free in-home estimates available throughout Bentonville, Centerton, Cave Springs, and Pea Ridge.
What's the difference between sand and finish, and screen and recoat?
Sand and finish is a full refinish: we sand the floor down to bare wood, optionally apply stain, then build up multiple coats of finish. Screen and recoat is a maintenance refresh: we lightly abrade the existing finish and apply one or two new coats. Sand and finish is right for worn or damaged floors. Screen and recoat is right for floors that are still structurally sound and just need a refresh.
How long does it take to refinish floors in a Bentonville home?
A typical 800 to 1,200 square foot Bentonville home takes 3 to 5 days for a full sand and finish, including stain dry time and finish cure time. Screen and recoat takes 1 to 2 days. We can phase the work room by room if you need to stay in the home.
Do you do dustless sanding in Bentonville?
Yes. We use HEPA-contained dustless sanding equipment on every Bentonville refinishing job. The vast majority of dust is captured at the source, which means you can stay in the home during the project and the cleanup at the end is dramatically faster.
Can you match the existing stain color on my Bentonville home's floors?
Yes. Custom stain matching is one of our specialties. We do test boards in your home so you can approve the final color before the full floor is stained. We have matched stains for Pinnacle Hills custom builds, Bentonville Square historic homes, and the Crystal Bridges Museum corridor.
Do you refinish engineered hardwood floors in Bentonville?
Sometimes. Engineered floors with a thicker wear layer (typically 4mm or more) can be refinished one or two times. Thinner-wear-layer engineered floors should be screen and recoated rather than fully sanded. We assess the wear layer at the free in-home estimate before recommending a course of action.
How often should hardwood floors be refinished?
Most Bentonville homes need a full sand and finish every 7 to 12 years, with a screen and recoat every 3 to 5 years to maintain finish integrity in between. High-traffic homes near downtown Bentonville and rental properties tend to be on the shorter end of that range; quieter homes in Osage Hills and Scotsdale often go longer.
Do you fix water damage and replace boards before refinishing?
Yes. Board replacement, gap filling, and water-damage repair are part of the prep on most full refinishing projects. We source matching species (red oak, white oak, hickory, heart pine, walnut) and blend new boards into the existing floor before sanding so the finished floor reads as one continuous installation.
Can we stay in the home during refinishing?
For most Bentonville projects, yes. Dustless sanding keeps airborne dust low. Many homeowners block off the work zone and live around it. Stain and finish coats produce light odor for 24 to 48 hours; if anyone in the home is chemical-sensitive, we recommend staying with family or in a hotel for two nights. We'll talk through your specific situation at the estimate.
Get a free hardwood refinishing estimate in Bentonville, AR
Family-owned. Bona Certified. Based right here in Bella Vista and proud to serve Bentonville homes and businesses. Call or email to schedule, Monday through Friday, 8am to 5pm.
Request a Free Estimate (479) 426-5337